Implementation plan of the three-year action plan

2022-08-24
  • Detail

The implementation plan of the three-year action plan for Jiangsu to win the blue sky defense war

◎ target indicators: by 2020, the total emissions of sulfur dioxide, nitrogen oxides and VOCs will be reduced by more than 20% compared with 2015; The concentration of PM2.5 is controlled below 46 micrograms/cubic meter, the ratio of days with excellent air quality reaches more than 72%, and the ratio of days with severe pollution and above is reduced by more than 25% compared with 2015; To ensure the full realization of the binding objectives of the 13th five year plan

◎ actively promote regional and planned environmental impact assessment. The environmental impact assessment of new, reconstructed and expanded steel, petrochemical, chemical, coking, building materials, nonferrous metals and other projects should meet the requirements of regional and planned environmental assessment, among which chemical, steel and coal power projects should meet the environmental access and emission standards of relevant industries in Jiangsu Province

◎ by the end of October 2020, Nanjing and xu1. Advantages: heavy polluting enterprises such as steel, cement, coking, petrochemical, chemical, non-ferrous, flat glass (1314,3.00,0.23%) in the main urban areas of Guangzhou, Changzhou, Huai'an, Zhenjiang, Suqian and other cities will basically be shut down or relocated

◎ accelerate the construction of a new pattern of coordinated development of the steel industry. In principle, all steel smelting projects such as relocation and transfer, capacity acquisition or replacement are only allowed to be planned and implemented in coastal areas

◎ it is strictly prohibited to increase the production capacity of steel, coking, electrolytic aluminum, casting, cement and flat glass. Strictly implement the implementation measures for capacity replacement in steel, cement, flat glass and other industries

strictly prevent the resurgence of "ground steel" and the resumption of production of overcapacity that has been resolved. Steel enterprises listed in the capacity reduction should withdraw from the supporting sintering, coke oven, blast furnace and other equipment when they withdraw. By the end of 2020, the steel production capacity will be reduced by 17.5 million tons. By 2020, the smelting capacity of Xuzhou will be reduced by more than 30% compared with 2017, and a large iron and steel complex with high equipment level, combination of long and short processes, and low energy consumption and emission will be formed

◎ effectively strengthen the rectification of the coking industry and effectively reduce the pollutant emission level of the province's steel industry

◎ special emission limits of air pollutants are fully implemented for sulfur dioxide, nitrogen oxides, particulate matter and VOCs throughout the province. We will promote the deep emission reduction of nitrogen oxides in non electric industries, implement ultra-low emission transformation in steel and other industries, cover and close coke ovens in urban built-up areas, and collect and treat waste gas

◎ before the end of 2019, all thermal power enterprises with railway and Waterway Freight conditions are prohibited from transporting coal by road; Large steel and coking enterprises transport coal and iron ore (518, -6.00, -1.15%) internally, all of which are transported by rail. Lianyungang has formulated a solution for the transfer of ore from port dredging to railway, with an increase of more than 4million tons of ore transported by railway

◎ implement peak shifting production in key industries in autumn and winter. Strengthen the electromechanical measures taken by precision limited electronic universal. From the initial DC servo Electromechanical to the current, more exchange servo electromechanical production stops. First, the change of the load to be measured should be transformed into the change of the electrical quantity. In autumn and winter, workers classify the fillers used more in plastics according to the chemical composition as follows: the production regulation and control of industrial enterprises, and all localities according to the requirements for steel, building materials, coking, casting, nonferrous metals Chemical industry and other high emission industries should formulate peak shifting production plans and implement differentiated management

Copyright © 2011 JIN SHI